How to connect the
Libra Leg Bag to a
Catheter or Sheath
1) Wash Hands.
2) Open peel pouch and remove Libra Leg Bag from its packaging.
3) Ensure the lever on the outlet tap is in the closed position
(Diagram 2).
4) Remove the grey protective cap from the Libra inlet connector.
5) Insert the ridged inlet connector into the end of the Indwelling
Catheter or Sheath. Insert the connector fully to allow a
secure connection.
6) The Libra Leg Bag should be positioned on the thigh or calf,
depending on the tube length, and secured appropriately with
the leg bag straps provided – see page 8 for more information.
7) Feed the Leg Bag Straps through the eyelets on the bag and
ensure the wavy silicone lines face onto the leg.
8) Make sure the inlet tubing isn’t kinked which can restrict the flow
of urine. Ensure you do not touch the open end of either the
Catheter or Leg Bag Connector when connecting, emptying or
changing the Leg Bag as this could lead to infection.
How to empty the
Libra Leg Bag
Your Healthcare Professional will be able to
advise you on how often you should empty
your Libra Leg Bag. The frequency will
depend on your urinary output and what
capacity of Leg Bag you are wearing.
If unsure, empty your Leg Bag when it is
two thirds full.
1) Wash Hands.
2) Empty the Libra Leg Bag by pushing the lever on the outlet tap
all the way down to open (Diagram 1, Page 6).
3) Urine will flow from the outlet tap.
4) After remember to close the tap fully after emptying
(Diagram 2, Page 6).
5) Wash hands.
Open tap
Diagram 1
Close tap
Diagram 2
6
7
Summary of Contents for Libra Conform Leg Bag Series
Page 1: ...Drainage Bag User Guide ...
