<cmd> = 3-digit (10-bit) hex "command" value
<dir> = direction bit
<id> = 4-digit (16-bit) hex "id" value
LTR:
<RR>: <A>-<GG>-<HH>-<III>-<FF>
<RR> = repeater on which the msg was received
<A> = area
<GG> = Goto/In-Use repeater #
<HH> = Home Repeater #
<III> = Group ID
<FF> = Free Repeater #
EDW:
<W>: <ccc> <ppppppp>
<W> = which of the two blocks (0 or 1) in the msg
pair this is <ccc> = command value. Represents a
variable # of bits from the received data (since
commands are variable length)
<payload> = remainder of msg, after removing the
<ccc> command value
EDN:
<W>: <ccc> <ppppppp>
<W> = which of the two blocks (0 or 1) in the msg
pair this is
<ccc> = command value. Represents a variable # of
bits from the received data (since commands are
variable length)
<ppppppp> = remainder of msg, after removing the
<ccc> command value
WXS:
<SAME Message> One code at a time
WXT:
"1050Hz Detect"
<decoded description> =
If present, how the radio SW
interpreted the msg.
PSR-500 User Manual
Page
121
Summary of Contents for PSR-500
Page 138: ...PSR 500 User Manual V1 9 138...
