795-94048
14 of 49
12/15/21
ACCESSORIES
Graymills manufactures a wide variety of parts cleaning supplies and accessories for use with your
PrintClean. Contact your Graymills Distributor for more information on the items listed below. (See
Catalog GM100 for additional items)
Parts Cleaning Brushes
Graymills parts cleaning brushes are specifically designed for tough parts cleaning work. The crimped
nylon fibers outwear ordinary brushes and won't ball up, flare out, or get flabby.
3B-G Standard Nylon Brush
— 2-1/2” nylon bristles for maximum durability.
5D
Double Brush
— 2-1/2” nylon bristle brush for broad cleaning at one end of the tapered handle
and a 1-
1/2” fine brush at the other.
6A
Flow-Thru Brush
– flushes parts as they are cleaned. Solvent flows through the core of the
handle. Manufac
tured with a 2’ connecting hose, 2·1/2” nylon bristles, and a rubber connector
which slips over the nozzle of the flexible metal hose.
7A
Flat Angular Flow-Thru cleaning brush with polyester bristles; can attach to pump nozzle with
included hose. Plastic Handle.
8A
Round Angular handle cleaning brush with polyester bristles; can attach to pump nozzle with
included hose. Plastic handle.
Parts Cleaning Accessories
L-4
Extra work shelf
— Model 854 only.
L-4S Extra work shelf
— Model 854 only; solid metal.
L-5
Extra work shelf
— Models 354, 554.
L-5S Extra work shelf
— Models 354, 554, and 654; solid metal.
L-6
External Drain Shelf
— 16” x 18”, hooks into position at left side of the tank to permit solvent to
drain back.
For all models
432-36376 Sludge Tray - For use with 354, 554 and 654 Series (2 required) or 854 Series (3 required)
432-36664 Sludge Tray - For use with 954 Series (2 required)
L-8
Parts Basket
— 16-gauge metal bottom and sides, solid metal ends. Measures 13” L x 12” W x
5” H. Fits on L-6 drain shelf.
L-9
Parts Basket
— 15-gauge frame with metal sides and bottom. Measures 32” L x 17” W x 5” H.
Can be supported above liquid level for parts draining by special pullout supports.
L-9L
Parts Basket
— Same as L-9 with the addition of a lifter bar for use with chain hoists.
Solvent Savers
Oil and Grease Removal (Packed two/carton)
SS-11
7" diameter x 11" long
–includes one connecting hose
SS-18
7" diameter x 18" long
–includes one connecting hose
Oil and Grease Plus Particulate Removal (Packed two/carton) In addition to special absorbent
materials, it contains a 5-micron filter cartridge that filters particulate from the solvent prior to oil and
grease absorbing stage.
SSC-11
7" diameter x 11" long
–includes one connecting hose
SSC-18
7" diameter x 18" long-includes one connecting hose
Solvent Saver Hanging Bracket-Stainless Steel bracket holds filter out of way on inside of parts washer.
SS-BRAC
12" long x 9" deep X 8" high
