25
M_LS900 Fibre - LS900 Edge_EN_C
Recommendations for installation
2.
Air extraction system (option)
Never operate the machine without a fume and gas extraction system that is properly
configured, installed and maintained in good working order. Laser marking certain
materials emits dangerous fumes and fine particles that may damage health.
Call an approved supplier to install an extraction system that complies with safety
requirements and local regulations.
Fumes are extracted to the air extraction system through a hose connected to the opening at the back of the
machine. This hose is not supplied with the machine but with the extractor.
2 modes are available:
Head mode (extraction at head): most efficient
mode but requires a powerful vacuum extraction
system
General mode (general extraction): used to
adapt an extraction system that has a good
flow rate but not much suction. An air intake is
provided in the double door.
Avoid combining the 2 modes.
Opening for air evacuation hose to air
extraction system