51
M_LS1000 XP_EN_C
Using the machine
4.
Transferring the file
1. Check that the USB cable is correctly connected at both ends.
2. Check that the machine screen says "Ready to receive".
3. Click on: Print.. (Graphics software).
Or Click on the icon:
,Click on:
(GravoStyle/LaserStyle).
The file is sent to the machine. The transferred bytes appear on the machine's screen until the transfer is
complete, which is confirmed by an audible signal.
Once the file is downloaded, the machine display updates automatically. The screen displays the file name
and certain parameters.
5.
Work table(s): Cutting or engraving
2 work table configurations are available for the LS1000 XP.
•
An "Engraving" configuration consisting of an engraving table in 3 section(s).
•
A "Cutting" configuration consisting of a cutting table with removable blades.
The 3 sections of the engraving table are placed on the cutting table.
In order to use the cutting table, one or all of the sections of the engraving table must be removed.
The removable blades are positioned according to the object to be cut.