39
USER MANUAL
GRAVITY Xduo
EN REV.V01 - 2020
2)
3rd cell from the middle left/ right approx. 20 - 30 cm behind the leading edge
3)
10th cell from the middle left/ right about 20 - 30 cm behind the leading edge
The specified values/ changes are to be noted in the inspection report!
17.8
Connecting parts
Checking the risers and und quick link openings:
1)
are there chafe marks, kinks, cracks, strong signs of wear?
2)
is all stitching tight?
3)
is the accelerator movement free and intact?
4)
are the brake loops still tight and firmly sewed?
5)
are the line locks corrosion-free, is the thread free to move?
6)
are the quick link openings/ line locks corrosion-free, is the thread tube clear and
intact? Measurement under a load of 5 kg. The determined values are to be
compared to the specifications from the DHV certificate form as a declaration of
conformity.
Permitted deviations can be found in the manufacturer's instructions. If the shoulder strap or
parts of it are defective, spare parts must be ordered from the manufacturer and the defective
parts exchanged for an original spare part.
The specified values/ changes are to be noted in the inspection report!
17.9
Lines
Checking the line tear strength: Line selection: A medium A, B and C main line and, if
available, a medium A and B cascade line are selected and checked for their tear
strength with a tensile strength tester.
Pull speed of the pull cylinder: v = 30 cm/ min
17.10
Tensile strength values and tear resistance
The specified values / changes are to be noted in the inspection report!
