Adam Hall GmbH · Adam-Hall-Str. 1· 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [email protected]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email [email protected] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
MA DRINK M
MICROPHONE STAND DRINK HOLDER
FEATURES
• Drink holder for mic stands, speaker stands and music stands with tubing
diameters up to 35 mm
• Securely holds bottles, cans, cups and glasses up to 70 mm in diameter
• Clamp adjustable for table top mounting, hex key included
DESCRIPTION
This drink holder features a unique screw clamp that is adjustable for vertical
or horizontal mounting options. It fits on mic stands, speaker stands and music
stands with tubing diameters up to 35 mm as well as table tops and securely
holds bottles, cans, cups and glasses with a maximum diameter of 70 mm.
Type
Drink holder
Material
Plastic, Steel
Colour
Black
Suitable for tube diameter
Up to 35 mm
Inner diameter
70 mm
Width
87 mm
Height
102 mm
Interchangeable rings
1 x 15 mm
Black ring pack included
Yes
Weight
0.16 kg
SPECIFICATIONS
