GB - 14
Fuel Stabilizer
Gasoline left in the fuel system for extended
periods without a stabilizer will deteriorate,
resulting in gum deposits in the system.
These deposits can damage the carburetor
and the fuel hoses, filter and tank. Prevent
deposits from forming in the fuel system
during storage by adding a quality fuel
stabilizer to the fuel. Follow the
recommended mix ratio found on the fuel
stabilizer container.
STOPPING IN AN EMERGENCY
1. Return steering levers to neutral position
2. Immediately set parking brake
3. Turn off PTO and engine
NOTE:
This unit is not equipped with the
return to neutral function. The control arms
must be manually brought back to neutral
from the forward position.
STARTING AND SHUTTING OFF
ENGINE
Starting the Engine
NOTE:
Disengage the PTO, place the
steering levers in neutral, and engage the
parking brake prior to starting the engine.
1. If the engine is cold, move the choke
control to the On position. If the engine
is warm or hot, do not use choke.
IMPORTANT:
DO NOT operate starter for
more than 10 seconds per minute as damage
can occur.
2. Put the ignition key in the switch and
turn it to the Start position.
3. As soon as the engine starts, release the
key.
4. Move the choke control to the Off
position from the Choke position. Wait
until the engine is running smoothly
before operation.
IMPORTANT:
Let the engine warm up
several seconds to several minutes
depending on outside temperature.
Stopping the Engine
1. Stop unit.
2. Disengage PTO.
3. Set throttle lever to slow.
4. Turn ignition switch to off position and
remove key.
5. Set parking brake.
OPERATING MOWER
1. Start engine.
2. Set throttle lever to fast.
IMPORTANT:
Never engage PTO if mower is
plugged with grass or other material.
3. Engage PTO to start mower blades. It
will take 2–3 seconds for the blades to
engage.
NOTE:
The parking brake must be
disengaged prior to moving the steering
levers from the neutral lockout position.
4. Release parking brake.
5. Use steering levers to move the unit.
6. Disengage PTO to stop mower blades.
TRANSPORTING UNIT
ALWAYS shut off engine, set parking brake,
remove key, and properly remove fuel when
transporting unit on a truck or trailer. Tie unit
down securely. Do not tie down by linkages,
guards, cables or other parts that may be
damaged.
WARNING:
Operating unit on
slopes may lead to loss of
steering control. When operating
on slopes be prepared to react to
an emergency situation.
