GB - 20
Gravely Dealers will provide any service which
may be required to keep your unit operating at
peak efficiency. Should engine service be
required, it can be obtained from a Gravely
Dealer or the engine manufacturer’s
authorized service center.
SERVICE POSITION
1. Place unit on a flat level surface.
ALWAYS stop engine. Ensure unit is
secure and will not tip over. Strap and
clamp onto lift if used.
2. Place steering levers in neutral and
engage parking brake.
3. Slide seat back to rearmost position.
4. Pull the seat latch back and tip seat
forward (Figure 6).
5. When service is complete, lower seat.
SERVICE AND ADJUSTMENTS
WARNING: AVOID INJURY. Read
and understand entire Safety
section before proceeding.
CAUTION: HOT SURFACES may
result in injury. DO NOT touch
engine or drive parts which are hot
from operation. Allow parts to cool
before servicing.
CAUTION: Be sure footing is
secure to accomodate weight shift
of seat when rotating it into service
position.
1. Seat Latch
2. Service Position
3. Steering Levers
Figure 6
