GB - 15
OPENING AND CLOSING HOOD
To open, tip seat forward and pull up on the
back of the hood. To close, put hood down
and tip seat back (figure 10).
MOWER DECK REMOVAL AND
INSTALLATION
Remove (Figure 11)
1. Remove PTO belt from electric clutch
(see REPLACING PTO BELT on
page 20).
NOTE: Perform step 2 and 3 for the right and
left side of unit.
2. Remove drag link from mower deck.
3. Remove front and rear trunnions from lift
arms.
4. Slide mower deck out from under unit.
Install (Figure 11)
1. Slide mower deck under unit.
NOTE: Perform step 2 and 3 for the right and
left side of unit.
2. Install front and rear trunnions on lift
arms.
3. Install drag link on mower deck.
4. Install PTO belt on electric clutch (see
REPLACING PTO BELT on page 20).
5. Level and adjust pitch of mower deck
(see LEVELLING AND ADJUSTING
PITCH OF MOWER DECK on page 16).
Figure 10
OE0016
1
1. Seat
2. Hood Tipped Open
2
OE021
Figure 11
3
1. Rear Trunnion
2. PTO Belt
3. Mower Deck
4. Drag Link
5. Front Trunnion
6. Lift Arms
2
1
4
5
6
6
Summary of Contents for MINI-ZT 915054
Page 27: ...GB 27...
