EN - 25
REMOVE AND INSTALL MOWER
DECK
Remove Deck
1. Remove PTO belt. See
2. Set deck to lowest cutting height.
3. Push the mower lift pedal forward
between cutting height number 4 and
number 5 to align the holes in the deck lift
shaft and the deck lift cover. Insert the
cutting height pin in the holes on the side
of the deck lift cover so it passes all the
way through the deck lift cover and shaft.
IMPORTANT:
The mower lift arms are not
locked unless the cutting height adjustment
pin passes all the way through both the deck
lift cover and shaft.
NOTICE:
Support the mower deck on blocks
or jack stands before disconnecting link
chains from mower lift arms to prevent the
deck from falling.
4. Remove link chains from mower lift arms.
Note hole location on mower lift arms for
replacement.
5. Remove the mower mounting pins
connecting the mower mounting arms to
the deck.
6. Slide mower deck out from under unit.
Install Deck
1. Slide mower deck under unit.
2. Connect mower mounting arms to deck
with mower mounting pins.
3. Install link chains on the mower lift arms
in the same holes they were removed
from.
WARNING:
AVOID INJURY.
Mower lift arms and mower lift
pedal could cause severe injury
if they are not locked before
removing the mower deck.
ALWAYS lock mower deck lift
before removing the deck.
Figure 27
9.5 – 15.9 mm
(3/8 – 1/2")
1. Parking Brake Paddle
2. Brake Rod
3. Clevis
4. Return Springs
5. Hair Pin
6. Clevis Pin
Figure 28
1. Mower Lift Arm
2. Link Chain
3. Mower Mounting Arm
4. Mower Mounting Pin
5. Mower Lift Arms Locked
