background image

1 -3

1.1  THE MANUAL

The purpose of this manual is to provide complete 
instructions for service, maintenance, disassembly, 
repair, and installation of the mechanical components 
for the unit.

Dealer trained service personnel should use this 
manual as a supplement to and reminder of the training 
sessions conducted by the company.

Read all information for servicing a part or system 
before repair work is started to avoid needless 
disassembly.

Operation

Before operation of the unit, carefully and completely 
read manuals supplied with the unit. The contents will 
provide you with an understanding of safety 
instructions and controls during normal operation and 
maintenance.

Safety Messages

For your safety and the safety of others always read, 
understand, and follow all DANGER, WARNING, and 
CAUTION messages found in manuals and on safety 
decals.

Directional Reference

All reference to left, right, front, or rear are given from 
the operator in the operator position and facing the 
direction of forward travel.

1.2  SERVICE AND REPLACEMENT PARTS

When ordering publications, replacement parts, or 
making service inquiries, know the Model and Serial 
numbers of your unit and engine.

Numbers are located on the product registration form in 
the unit literature package. They are printed on a serial 
number label, located under the hood of your unit.

1.3  PRODUCT REGISTRATION

A warranty registration card must be filled out, signed, 
and returned at time of purchase. This card activates 
the warranty. Claims meeting requirements during 
limited warranty period will be honored.

Specific Model and Serial Numbers are on a label 
located on the frame of your Tractor and on a label 
located on the product registration form. Record those 
numbers below and transfer the label from the product 
registration to place indicated below. Use these 
numbers whenever parts or service is required.

1.4  UNAUTHORIZED REPLACEMENT 
PARTS

Use only Gravely replacement parts. The replacement 
of any part on this vehicle with anything other than a 
Gravely authorized replacement part may adversely 
affect the performance, durability, or safety of this unit 
and may void the warranty. Gravely disclaims liability 
for any claims or damages, whether warranty, property 
damage, personal injury, or death arising out of the use 
of unauthorized replacement parts.

1.5  DISCLAIMER

Gravely reserves the right to discontinue, make 
changes to, and add improvements upon its products 
at any time without public notice or obligation. The 
descriptions and specifications contained in this 
manual were in effect at printing. Equipment described 
within this manual may be optional. Some illustrations 
may not be applicable to your unit.

1.6  TECHNICAL SERVICE 
COMMUNICATIONS

Gravely Technical Service communicates information 
to the field using Service Letters, Service Bulletins, 
Product Notices, and Campaigns. Each 
communication signifies a type of information and 
priority. The dealer is responsible to carry out the 
directive provided in the communication. The types of 
communication are:

Service Letter - General technical information for the 
dealer. Technical information on how to service the 
product and product improvements.

Service Bulletin - Notification to update products to 
resolve certain issues or a notification of a policy 
change.

Product Notices - Notification of limited product 
located in a certain region. This is a limited distribution 
to only those who received the product involved.

Campaigns - Notification of a safety related issue. All 
products must be updated and are tracked by the 
factory until all units are corrected.

SECTION 1 - INTRODUCTION

Summary of Contents for 985103













































Reviews: