manualshive.com logo in svg

Gravely 915172, Operator'S Manual

Share
Download
Gravely 915172 Operator'S Manual Download Page 23

EN - 21

CHECK TIRE PRESSURE

See 

Specifications

 on page 37 for 

recommended tire pressure. 

CHECK CARBON CANISTER 
FILTER

Models 915176, 915236, 915238, 915240, 
915242

See Figure 13.

Clean or replace filter whenever engine air 
filter is cleaned or replaced.

CHECK FASTENERS

Check for loose or missing hardware.

LUBRICATE UNIT

See Figure 14.
1. Place unit in service position. See 

Service Position

 on page 20.

2. Apply grease to seat tracks through slots 

under seat plate.

3. Return seat to operating position and 

slide seat back and forth to spread 
grease along tracks. 

WARNING: 

AVOID INJURY. 

Explosive separation of tire 
and rim parts is possible.

• DO NOT inflate tires above 

the recommended pressure. 

• DO NOT inflate tires with a 

compressor; use a hand 
pump.

• DO NOT stand in front of 

tire assembly when 
inflating. Use a clip-on 
chuck and extension hose 
long enough to allow you to 
stand to one side.

• DO NOT mount a tire 

without proper equipment 
and experience.

Figure 13

1

1. Carbon Canister Filter

Figure 14

Summary of Contents for 915172















































Reviews:

No comments

Brands by name

Popular brands

Load more brands