Page 8.1
3. fill the herb chamber
The mouthpiece is held by two strong magnets. To access the heating chamber,
simply grasp the ceramic mouthpiece and pull it upwards to remove the mouthpiece
from the GRAVEDA®
Medic
+
. Fill the chamber with desired ground material by gently
pressing the material into the chamber with the tool provided. For best results, the
chamber should not be filled more than 3/4 and should not be tamped too tightly.
Please note that the airflow of the GRAVEDA®
Medic
+
is influenced by the filling of
the chamber. If the material for example is stuffed too tightly into the chamber it
blocks the air flow. Too much material can cause that not all material is vaporized
evenly. It is very important to make sure that the chamber is filled correctly so that
you can vaporize with your GRAVEDA®
Medic
+
right from the beginning.
4. smart path
If you select "S", the OLED display indicates that the GRAVEDA®
Medic
+
has been
switched to Smart Path mode by showing the MIN temperature. You can then adjust
the temperature range and time of your session. The OLED display indicates that the
heating chamber has reached the desired minimum temperature by displaying the
heat symbol; the temperature is increased to the desired maximum temperature at a
constant rate during the desired session time.
5. switch off the device
To turn off the GRAVEDA®
Medic
+
, quickly press the power button three (3) times
within two (2) seconds.
6. cleaning the GRAVEDA®Medic
+
The mouthpiece can be cleaned with min. 80%/vol isopropanol alcohol. Let the
mouthpiece dry completely before putting it back on the GRAVEDA®
Medic
+
. Remove
the filter screen from the mouthpiece and clean or replace it if necessary. The
heating chamber can be cleaned with the brush tool provided or use cotton swabs
with wooden handle. To clean the outer area of the chamber and the air passage, you
can use a small amount of min. 80%/vol isopropanol alcohol with a cotton swab, but
do not use detergents or scouring agents.
GRAVEDA®
GRASPRESSO®
Registered Trade Mark Registered Trade Mark
Commissioning
