GRAUPNER VELOX Operating Instructions Manual Download Page 13

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY

 

No liability for printing errors. Technical modifications reserved.  

10/2010

  

#0062222

 

 

 

 

13

 

Applicable law 

This declaration, and the claims, rights and obligations arising from it, are based 
exclusively on the pertinent German Law, without the norms of international private 
law, and excluding UN retail law. 
Important safety notes 
You have purchased a kit which can be assembled to produce a fully working RC 
model when fitted out with the appropriate accessories. As manufacturers, we at 
GRAUPNER are not in a position to influence the way you install, operate and 
maintain the boat, nor the other components used in connection with the model. For 
this reason we are obliged to deny all liability for loss, damage or costs which are 
incurred due to the incompetent or incorrect use and operation of our products, or 
which are connected with such operation in any way. Unless otherwise prescribed by 
binding law, the obligation of the GRAUPNER company to pay compensation, 
regardless of the legal argument employed, is excluded. This includes personal 
injury, death, damage to buildings, loss of trade or turnover, interruption of business 
or other indirect or direct damages which are caused by the operation of the model. 
Under all circumstances and in all cases the company’s overall liability is limited to 
the amount which you actually paid for this model. 
 
The VELOX is operated at the sole risk of the operator. To avoid injury to persons 
and damage to property please handle your model boat carefully and operate it 
conscientiously at all times. 
Before you run the boat for the first time it is important to check that your private third 
party insurance policy provides cover when you are operating model boats of this 
kind. If you are not sure, take out a special insurance policy designed to cover the 
risks of RC modelling. 
These safety notes are important, and must be kept in a safe place. If you ever 
dispose of the model, be sure to pass them on to the new owner. 
 

The following points are important and must be observed at all times: 

This model is not suitable for children or young persons under fourteen years of age. 
Before you run the model check that the radio control system is working properly, 
and that all electrical connections are firmly seated. 
Ensure that the channel on which you intend to run the model is not already in use by 
another modeller. Never run the boat if you are not certain that your channel is free. 
Remember that other radio sets and transmitting equipment can cause serious 
interference to the model’s operation. As far as possible, ensure that no equipment of 
this kind is switched on in the vicinity while you are operating the model. 
Do not exceed the recommended operating voltage. Higher voltages can cause 
terminal damage to the electronics and the model. 
Do not subject the model to high levels of humidity, heat, cold or dirt. 
Take particular care to keep the model properly sealed. Open the boat after each 
run, and allow it to dry out thoroughly. 
Care and maintenance 
After every run remove the superstructure and remove any water which has 
penetrated the hull. If water gets inside any of the electronic units, dry them out 
thoroughly and send them to your nearest GRAUPNER Service Centre for checking. 
Spraying the electronics with WET.PROTECT (Order No. 968.50) is an effective 
method of preventing the effects of damp. 

Summary of Contents for VELOX















Reviews: