8
◎ MEMORY SETUP
ULTRA DC QUAD has 4 channels, 10 memories per channel
It is used to store specific battery, charge, discharge and safety parameters, as well as
being used to initiate charging, discharging, cycling/store mode functions.
①
Press ENTER BUTTON then the memory number blinks. Press INC/DEC buttons to
select the memory number
②
Press ENTER button then BATTERY TYPE blinks. Press INC/DEC buttons to select
battery type.
④
Press ENTER button and INC/DEC buttons to set battery capacity.
③
Press ENTER button then battery cell blinks. Press INC/DEC buttons to set battery cell.
⑤
Press ENTER button to remove the curser blinking.
⑥
Press INC/DEC buttons to set charge current and charge voltage and then press ENTER
button to remove the curser blinking.
⑦
Press INC button to access to DISCHARGE mode and press INC/DEC buttons to set
discharge current and discharge voltage and then press ENTER button to remove the
curser blinking.
Pofile
LiPo
Pofile
LiPo
Pofile
LiPo
Pofile
LiPo
Pofile
LiPo
LiPo
C=3.0A
6S
6S
6S
6S
6S
[01]
3000
[01]
3000
[01]
3000
[01]
3000
[01]
3000
CHARGE
4.2V/C
LiPo
D=1.0A
DISCHARGE
3.0V/C
Summary of Contents for S2007 Ultra DC Quad
Page 20: ......
