GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler Ident. # 0059183 4.2008
35
Material
Typical joint
Adhesive
Order No.
GRP to
Fuselage to servo
UHU plus endfest 300
plywood
plate
Order No. 950.43
GRP to
Fuselage to aero-tow
UHU plus endfest 300
aluminium
mechanism
Order No. 950.43
GRP to
Instrument binnacle to
UHU plus schnellfest
plywood
seat support framework
Order No. 962
Areas of the fuselage which are to be glued must be rubbed down with fine-grit
glasspaper to remove any lingering traces of mould release agent. Carefully remove
all sanding dust. Aim at reducing the glossy surface to a
matt
finish, otherwise there
is no chance of a durable glued joint between the fuselage and other parts.
When using adhesives it is important to observe the instructions supplied by the glue
manufacturer. The main Graupner FS catalogue includes many other types of
adhesive.
When you are using solvent-based glues be sure to provide good ventilation in your
workroom.
Read the adhesive manufacturer’s instructions.
Radio control system
We particularly recommend computer radio control systems, from the mc-12 to the
mc-24.
or
Recommended servos:
Rudder
DS 8411
Order No. 5151
1 required
Elevator
DS 8411
Order No. 5151
1 required
Ailerons
DS 3328
Order No. 5157
2 required
Airbrakes
DS 3328
Order No. 5157
2 required
Aero-tow release
DS 8231
Order No. 5155
1 required
We recommend the DS 19 or SMC 19 receiver, or the XR-20 iFS unit.
Order No. 3050
Power switch harness
1 required
Servo extension leads
Order No. 3935.105
for ailerons
2 required
Order No. 3935.18
for connecting servo leads to receiver
2 required
Order No. 3935.11
for connecting servo leads to receiver
2 required
Order No. 3935.50
for connecting servo leads to receiver
1 required
