GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler 02/2007
25
Order No.
9393
Instructions
KWIK FLY MK 3
For two-stroke motors of 9.0 cc or
four-stroke motors of 8.56 cc capacity
This model requires a five-channel radio control system
Specification
Wingspan approx.
1510 mm
Fuselage length excl. spinner approx.
1280 mm
Wing area approx.
53 dm²
Tailplane area approx.
10.4 dm²
Total surface area approx.
52.9 dm²
All-up weight according to fittings approx. 3065 g
Longitudinal dihedral
0 - 0.5°
Centre of Gravity approx.
102 mm aft of the root leading edge
Caution:
This model is not a toy!
If you are a beginner to this type of powered model, please ask an experienced
model flyer for help and support. If you attempt to operate the model without knowing
what you are doing, you could easily injure yourself or somebody else. Please keep
your safety and well-being in mind at all times.
Important: before you start construction
Even if you have already built a large number of RC models please read right through
these instructions and check that all the kit components are actually present. We
have taken great trouble to keep construction as simple as possible, without making
any compromises in the area of safety.
Note regarding the film covering
Minor creases or bubbles may develop in the film covering due to major fluctuations
in weather conditions (temperature, humidity etc.); in rare cases you may even find a
slight warp in a component. These minor faults are in the nature of film-covered built-
