Page
23/53
- This function is likely to be used more to prevent battery pack from being
overheating rather than normal charge completion
3-4. MAX CAPACITY
- This is to set your wanted discharge percentage against the selected battery
capacity.
- If “OFF” is set, this max capacity function is not activated.
- If battery capacity is 3000mAh and if you set 10% out of the total max capacity, the
charger should stop discharging at 300mAh
3-5. MATCHED VOLT
- This is only for NICD and NIMH batteries.
- This mode should be activated when it moves to “MATCH” mode from
DISCHARGE PROCESS
- To activate this mode, balancing cable MUST be connected to the balancing port
of the charger.
- Discharge to selected voltages with selected discharge currents and match each
cell voltage.
- If the discharge cut-off voltage is set to the same voltage as the match voltage, the
discharge current will be reduced when the cut-off voltage
is reached, to hold the constant voltage at the match/cut-off voltage level.
High current competition NiMH batteries should be matched before charging.
Matching the batteries does increase the life time of the battery.
Summary of Contents for 6444
Page 17: ...Seite 13 60 ...
Page 77: ...Page 13 53 ...
