GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors. Id. No. 0062316 10/2011
2
Please be sure to read through the safety notes in the Appendix to these operating instruc-
tions. If you ever dispose of the model, it is important to pass on these safety notes and the
complete building instructions to the new owner.
Introduction
The ELEKTRO JUNIOR PLUS S is an elegant electric-powered model aircraft which
offers particularly docile flying characteristics combined with an outstanding perfor-
mance in the air. The aeroplane is supplied virtually ready to fly, but some experience
of model flying is required if it is to be operated successfully. The aeroplane and the
HPD high-performance motor system are carefully optimised for the 3S / 1600 mAh
LiPo battery supplied in the set: the model is capable of a vertical climb at a
moderate current drain of around 30 A. The aircraft can be stored and transported
safely and conveniently in the packaging carton.
Pack contents
1. Fuselage with factory-installed HPD motor set, including CAM FOLDING PROP,
pre-fitted C 261 rudder and elevator servos, Graupner GR-12 HoTT receiver and
CARBON-LOOK canopy
2. Pair of wings with factory-fitted C 261 aileron servos
3. CFRP wing spar, 10 / 8 Ø x 1000 mm
4. Tailplane with elevator horn
5. LiPo flight battery, 3/1600 11.1 V / 1.6 Ah, Order No. 7634.3, including safety
notes
6. 4565.HOTT operating instructions in German, English and French
Essential accessories (not included)
GRAUPNER HoTT COMPUTER SYSTEM transmitter
min. MX 12 to MC 32
Transmitter charge lead
Order No. 3022
Battery charge lead with G3.5 connector
Order No. 2970.L
ULTRAMAT 16 S battery charger
Order No. 6468
Tools required to assemble the model (not included)
Cross-point screwdriver
Operating instructions
Please start by reading right through these operating instructions, and make yourself
familiar with the method of operating your HoTT transmitter. Keep the manual for
your HoTT COMPUTER SYSTEM to hand when preparing the model. When you are
setting up the transmitter with the LiPo battery and the speed controller connected
(G3.5 plugs / sockets), it is particularly important to avoid the folding propeller fitted to
the motor coming into contact with any part of your body. Any error or carelessness
