How to Assemble Your Ladder Barrel
What Comes in the Box
A. Ladder (x1)
B. Barrel (x1)
C. Top pole (x1)
With Rubber Ends (x2)
D. Screws (x2)
E. Black Knobs (x4)
STEP 1 - Remove Contents from Box
Place the long-side box down. Use the
scissors to carefully cut ties and open the
box. Remove the three packed bundles
from the box.
STEP 2 - Place the Top Pole on the Ladder
Locate the top pole. Remove the rubber end off one side of the pole (
1
). Insert the pole through the
top two holes of the ladder (
2
). Then align the holes of the top pole with the holes of the ladder by
aligning the two tape (
3
). Locate the 2 screws attached to the pole and use the Phillips screwdriver
to carefully tighten the two screws to fix the top pole to the ladder. Put the rubber end back (
4
).
IMPORTANT NOTE:
Gratz Industries is not responsible for any damages to the Ladder Barrel that is caused by improper opening, set up or installation. Please email [email protected] for any inquiries.
What You Will Need:
Phillip
Screwdriver
Scissors
1/2” Wrench
OR Adjustable
Wrench
**DO NOT USE A KNIFE OR BLADE**
**DO NOT STAB**
**DRILL HIGHLY RECOMMENDED**
4
D
*included
