LADDER BARREL
Assembly Instructions
Page 1: ...LADDER BARREL Assembly Instructions...
Page 2: ...oles of the ladder 2 Then align the holes of the top pole with the holes of the ladder by aligning the two tape 3 Locate the 2 screws attached to the pole and use the Phillips screwdriver to carefully...
Page 3: ...k knobs and evenly sliding the barrel away from the ladder STEP 4 Prep for Use IMPORTANT NOTE Gratz Industries is not responsible for any damages to the Ladder Barrel that is caused by improper openin...
Page 4: ...AIN THAT THE EQUIPMENT IS OPERATED ON A LEVEL SURFACE KEEP AT LEAST 18IN OF SPACE BETWEEN EQUIPMENT BE SURE THAT ALL PARTS ARE FULLY TIGHTENED BEFORE BEGINNING ANY EXERCISE INSPECT THAT THE SPRINGS HA...
