STEP 4 - Mounting High Back
When placing back the High Back, make sure the 4 pins are
removed (
Figure A
). Grab the removable High Back and carefully
place it on the Wunda Chair with the support poles aligning
with the side pegs of the Wunda Chair (
Figure B
).
Before inserting the 4 pins make sure the holes of the High Back
align with the holes of the Wunda Chair. Insert 4 pins (
Figure C
)
STEP 5 - Prep for Use
Prior to using, make sure all springs
are in place to your liking and are
properly attached.
IMPORTANT NOTE:
Gratz Industries is not responsible for any damages to the Combination Chair that is caused by improper opening, set up or installation. Please email [email protected] for any inquiries.
How to Assemble Your Combo Wunda / Electric Chair - pg. 2
(Figure A)
(Figure B)
(Figure C)
