The illustrated parts list of the accessories on the following pages is meant for identification and
accurate specification of current spare parts. In order to facilitate quick retrieval of the required parts,
the list and corresponding figures is divided into the following groups of parts:
GROUP OF PARTS
PARTS LIST
Page
CORRESPONDING FIGURE
No.:
o
Pressure gauges and safety switches
2
RC6-A1
o
Direct drive
5
RC6-A2
o
Cooling water device
6
RC6-A3
Figures
All parts shown in the figures bear an item number.
Assemblies are indicated by a dotted frame with
separate item number around the parts included in
that particular assembly;
the parts themselves bear the same item number,
followed by a sequence number (e.g. 2.1, 2.3, 2.3, etc.).
Parts lists
The parts are specified by the headings “Item”,
“Description” “Ref. no.” and “Qty” (= Quantity).
*
If an asterisk is used instead of the Ref. no., this means
that the relevant part cannot be obtained separately.
When for some part no quantity has been given, the
quantity required depends on the compressor size.
When determining the required quantity of parts, it
should be considered that the listed quantities relate
to the corresponding figure and not to the compres-
sor as a whole. When ordering, for example, valve
rings for two discharge valves, the quantities stated
in the relevant list must be doubled, because these
apply to one discharge valve only.
RC6W
This is a RC6 compressor, including water cooled cylin-
der heads
How to order!
It is emphatically pointed out that a prompt despatch of the correct spare parts can be
guaranteed only if the following information is given:
1. Type designation of the compressor
2. Serial number of the compressor
shown on the compressor name plate
3. Quantity, Description and Ref. No. of the required parts.
PARTS LIST RC6
ACCESSORIES
Refrigeration Division
Grasso
v002.99.05.en
RC6
Accessories 1
