Grasslin thermio essential H Brf, Operating Manual

Page: 63 / 172

The room code that can be set on the room thermostat is in the range 00 –
16 and must match the DIP switch setting on the actuator.
4. Press the top button (Fig. 1/4) to increase the value or the bottom button (Fig. 1/7) to decrease the
value.
5. Press the radio communication button (Fig. 1/11) to save the room code or wait five seconds until
the display switches to the current temperature.
Setting up the DIP switch on the actuator (receiver)
1. Remove the cover (Fig. 2/4) of the DIP switch and set the DIP switch (Fig. 2/2).
ð
The same room code must be set on the room thermostat and the
actuator.
When setting the DIP switch position, note the room code table (Fig. 10).
2. Replace the cover (Fig. 2/4) of the DIP switch.
EN
63