11. Pulse switching commands
25
If a load with a higher switching frequency – in the seconds range –
is switched ON and OFF, it must be ensured that adverse effects on
the quality of lighting units (flicker) and faults in radio and television
reception are avoieded
You determine the times for pulse switching commands, symbol .
Pulse times are: 01...99 seconds or 01...99 minutes.
A pulse switching command consists of: Start time and ON or OFF
switching duration.
Example:
Start time
Monday to Friday
09.00
ON switching duration
10 seconds
ON switching duration
Start time
OFF switching duration
Start time
Select a free memory location:
Press the Prog. key 1x.
– –.– –
– – – –
Input as required:
– Switching command, weekday(s),
switching state see Section 8
– Single date without/with year,
see Section 9.1
– Date range without/with year,
see Section 9.2
Press the key 1x.
01 seconds are offered.
GB
