Grasshopper 718D Service Manual Download Page 11

Page: 11 / 48

Steering levers

out, PTO switch

'OFF', and

operator 'ON'

seat. If engine

starts, all switches

are functioning in

their closed

position.

Turn engine

'OFF'.

Does engine

crank with

operator 'OFF'

the seat?

Does engine

crank with

operator 'ON'

the seat and

only left steering

lever 'IN'?

Does engine

crank with only

right steering

lever 'IN'?

Does engine

crank with only

the PTO switch

turned 'ON'?

Steering levers

out, PTO switch

'OFF', operator

'OFF' seat,

parking brake

'OFF' and engine

running. Does

engine die when

steering levers

are pulled in?

Replace interlock

module.

All safety

systems are

functioning

properly.

Replace seat

switch.

Adjust or

replace left

steering switch.

Adjust or

replace right

steering switch.

Replace PTO

switch.

Steering levers

out, PTO switch

'OFF', operator

'ON' seat,

parking brake '

ON' and engine

running. Does

engine die when

steering levers

are pulled in?

Replace brake

switch.

Yes

MODEL612, 614, 616, 718,
718K, 720K

TESTING SAFETY SYSTEM FOR PROPER OPERATION

Notes:

Proper operation of the safety

system indicates that:

1. To start the engine, the operator

must be on the seat, both steering
levers must be out, and the PTO
switch must be off.

2. With the engine running and the

operator off the seat, the en-
gine will die if either steering
lever is brought in or the PTO
switch is turned on.

3. The engine will also die if the

operator gets off the seat with
either steering lever in or the
PTO switch turned on.

4. The engine will die if the steer-

ing levers are brought in with
the parking brake on.

Summary of Contents for 718D

















































Search results

Summary of Contents for 718D

Reviews:

Related manuals for 718D

Brands by name

Popular brands

Grasshopper 718D, Service Manual

Search results

Summary of Contents for 718D

Reviews:

Related manuals for 718D

Brands by name

Popular brands