GRASS VALLEY zodiak, User Manual

Page: 408 / 458

408 Zodiak User Manual
Section 5 — System Operation
3. Use the navigation controls to display the folder containing the items to
be deleted, then touch it so it is highlighted.
4. Touch
Delete
. A pop up message will appear asking if you are sure.
Choose
Yes
. The folder and all its contents will be deleted from the
drive.
If you delete the DEFAULT directory, you should immediately create a new
one in exactly the same location on the Still Store C: drive. This directory is
used for automatic Still Store Loader application transfers.
Still Store E-MEM Operations
Still Store E-MEM Enable Buttons
Selected Still Store settings and parameters can be saved in E-MEM effects
for reuse. The Still Store outputs are assigned by default to the E-MEM
enable buttons listed in
Table 13 . These assignments can be changed from
the E-MEM Prefs menu.
Still Store E-MEM Parameters
The following Still Store settings are keyframeable:
• Item load from the current folder to each Still Store output,
• Each Still Store output Video/Key Pair state (on or off),
• Position,
• Crop,
• Freeze Frame Mode, and
•
Start at KF
trigger.
Inserting or modifying a keyframe in an effect will save the above settings
on that keyframe for that E-MEM level. These settings will be enacted later
when the E-MEM register is recalled or run.
S-Linear path controls are applied to all interpolated Still Store E-MEM
operations. Note that positioning and cropping is on line and pixel bound-
aries. These aspects of an image cannot be moved perfectly smoothly with
the Still Store (if smooth motion is desired use a Transform Engine).
Table 13. Default Still Store Output Channel E-MEM Assignments
Still Store
Output Channels
E-MEM
Enable Button
Ch1, 2 SS A
Ch 3, 4 SS B