GRASS VALLEY zodiak User Manual Download Page 344

Page: 344 / 458

344

Zodiak User Manual

Section 5 — System Operation

Copy/Pasting Files

Navigate to the directory containing the file to be copied, using the
buttons on the right.

Touch the file(s) to be copied.

Touch the

Copy

button. A file display pane will split, and a new pane

with its own scroll bar will appear below it.

Top

, and

Open

navigation

buttons will also appear for the lower pane (

Figure 237

). Files can only

be pasted to the new lower pane. The

Delete

Create Folder

, and

Rename

functions apply to the upper pane only, and are inactive during a
Copy/Paste operation.

Figure 237. File Operations Menu with Copy Pane

Navigate the lower pane to the desired directory, using its navigation
buttons.

Touch the

Paste

button. A message indicating the file is being copied

will be displayed, and when finished the lower pane will go away.

CAUTION

Copy and Pasting a file with the same name as an existing file will overwrite
that file without any precautionary message.

Summary of Contents for zodiak











































































































































































































































































































































































































































































Search results

Summary of Contents for zodiak

Reviews:

Related manuals for zodiak

Brands by name

Popular brands

GRASS VALLEY zodiak, User Manual

Search results

Summary of Contents for zodiak

Reviews:

Related manuals for zodiak

Brands by name

Popular brands