274
Zodiak User Manual
Section 4 — Menus Overview
Transform Menu
The Transform menu allows you to select the keyer or Global channel to
control (delegation), select the desired type of transform control, and then
adjust the parameters associated with the chosen control using the soft
knobs or a pop-up keypad. The menu is accessed by touching the
Transform
button on the Home menu, then touching the
Transform
category selection
Figure 188. Transform Menu
The Transform Engine menu has some of the same transform controls as
the Main panel’s Joystick subpanel. The Joystick (
X
,
Y
,
Z
,
Size
) can be con-
trolled from the menu with the soft knobs or keypad entry.
Transforms Menu Delegation
The Transform Engine – Transforms menu contains a data pad matrix in the
upper left for delegation (
). Data pads for keyers with Transform
Engines assigned will be active. Inactive keyers will be grayed out. Touch
an active data pad to delegate the menu to control one of the 12 keyers, or
to control a
Global
channel (see
). The keyer data
pads themselves indicate whether Crop is enabled, Global Assignment is
on, and if the Key is off.
Summary of Contents for zodiak
