Section ― Setting Editing Environments
64
STORM 3G ELITE ― Setup Guide
16
Configure the other items if necessary and click
[Next].
The screens for configuring the connection
information or format at outputting is displayed.
17
Click the pulldown of "Interface" and select
"STORM 3G Elite" from the list.
The names of the mounted products are displayed
in the "Interface" list. Select the interface to use for
output.
POINT
When printing to tape of a DV device
using IEEE1394 terminal on your PC,
select "Generic OHCI". When not using
the interfaces for outputting, exporting
to an HDV device, or printing to tape of
a device not controlled by deck, select
"Not Select".
•
