GRASS VALLEY Prelude Instruction Manual Download Page 90 | Manualshive

Page: 90 / 102

GRASS VALLEY Prelude Instruction Manual Download Page 90

90

Prelude — Instruction Manual

Section 3 — Configuration Reference

ENC-UPC Attributes and Flags

The lower portion of the Control Panel configuration page contains several
Control Panel parameters, which are based on Encore functionality. Grayed
out attributes and flags are not available for use with this panel type.

The parameters available are identical to those for the XY panel, described
starting on

, except the buttons are relocated into the half/rack form

factor and the NP Server feature supports serial communications.

NP Server Configuration

Opens a window allowing configuration of Native Protocol servers for the
control panel. The UCP panel supports one serial server, in addition to four
Ethernet servers (

). The data in this window is not editable. See

NP Client/Server Configuration Process

for specific instructions.

Figure 65. NP Server Configuration Window, UCP

«
...
88
89
90
91
92
...
»

Summary of Contents for Prelude







































































































Reviews:

No comments