GRASS VALLEY NV9649, User Manual

Page: 135 / 167

125
NV9649
User’s Guide
You can change high-tally from high to medium brightness and change low tally to
medium or low brightness, as long as high tally is brighter than low tally. (They cannot both
be medium brightness.)
To change a color’s brightness, select the button for the color you want to change. Press
either the ‘Make Color Brighter’ button or the ‘Make Color Darker’ button, whichever is
available.
If you make a change, press ‘Save’ to commit the change or press ‘Cancel’ to discard the
change. Pressing either button returns you to the panel menu.
The actual colors cannot be represented accurately in print or in a PDF file displayed on
your screen. There is a small amount of variation in color from button to button. See
LCD
Buttons , on page 141 for a better color chart.
Setup Mode
Setup mode occurs when the NV9649 is disconnected from its network and is freshly
powered up. In setup mode, you can set or change the panel ID, identify the software
version, and perform a test of the panel’s buttons. It is in setup mode that you must initially
set the panel ID.
 It can take several seconds for the buttons to appear.
The panel powers up with 2 buttons at the top left, and a ‘Menu’ button at the lower right,
illuminated in green. The button at the top left shows the current panel ID. The panel ID is
usually set to 0 at the factory:
Panel ID
Press the menu button to proceed to the first part of setup which is to set the panel ID:
NV9649 NV9649
PANEL ID PANEL ID
6491 6491
NO NO
SERVER SERVER
MENU MENU Menu button
ENTER ENTER
PANEL ID PANEL ID
SOFTWARE SOFTWARE
VERSIONS VERSIONS
EXIT EXIT
PANEL PANEL
TEST TEST
MODE MODE