manualshive.com logo in svg

GRASS VALLEY NV9641A, User Manual

Share
Download
GRASS VALLEY NV9641A User Manual Download Page 91

81

NV9641A

User’s Guide

Environmental Specifications

NV9641A Environmental Specifications

 

Defaults 

Initial Panel State 

Multi-destination mode or X-Y mode, selectable. 

Destination: the configured default.

Buttons: high-tally is maximum brightness; low-tally is low brightness.

Configuration Page 

The initial configuration page for a new NV9641A configuration provides 8 selection buttons 
(recommended), an XY/MD mode selection button, an X-Y Display button, and a take button. 

The default panel options are:

Panel mode:

Multi-destination.

Release mode:

Normal.

Default destination: 

None.

XY Data Routing:

Automatic.

MD Data Routing: 

Automatic.

Default name set:

System names.

Multidest Device Limit:

8.

Src/Dst Immediate Take

Enabled.

All other options:

Disabled (check boxes clear).

The tally inputs and outputs are initially undefined.

DHCP 

The panel is set up to respond to DHCP from the factory. It is possible to assign the panel a fixed 
IP address using the Panel IP Configuration Utility. 

Drawings 

The drawings on the following pages identify features and provide overall and critical 
dimensions.

Specification

Detail

Operating temperature

0–40 °C, ambient.

Relative humidity

0 to 90%, non-condensing.

Cooling

No fan required.

Summary of Contents for NV9641A















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands