GRASS VALLEY M-Series, Installation Manual

Page: 40 / 50

40
M-Series Upgrade Kit Manual 6 July 2004
Chapter 5 Installing the Front Panel
Modify VGA display setting
Perform this procedure to configure the iVDR display settings for 640 by 480 display
area which is required for front panel operation.
1. Power-on the iVDR.
Wait for Windows to initialize and AppCenter to start automatically.
2. Exit AppCenter as follows:
a. In the AppCenter toolbar, click
System | Shutdown
b. Select
Exit To Windows
.
c. Click
OK
.
The Windows desktop appears.
3. Right-click on the Windows desktop, then choose
Properties
.
4. Select the
Settings Tab
, then set the Screen Area to
640 x 480
pixels.
5. Click
Apply
.
6. Select
OK
at the warning dialog.
7. Select
Yes
to keep the new settings.
8. Select
OK
to close the Display Properties dialog box.
Power-off and remove left access door
Press latch and
raise door
3
Power-off the iVDR and
disconnect the power
cable
1
Remove
screw
(Use T15 tip)
2
Slide off
4