17
Power Supplies
Internal Power Supplies
The information below gives an overview of the power supplies used in the LiveTouch
SQ2000 Server.
The LiveTouch SQ2000 Server is supplied with two power supplies as standard, one
powering the device and the other providing redundancy.
This symbol indicates that hazardous voltages are present inside the devices.
No User
Serviceable Parts
are inside the power supplies. This unit should only be serviced by
trained personnel.
Before powering on the LiveTouch Server, make sure that all foam used to protect the
device in transit is removed.
The power supplies for the LiveTouch SQ2000 Server are locate at the rear of the unit. The
power supplies do not have independent on/off switches. The LiveTouch server has an
On/Off switch on the front panel.
Note:
To reduce the risk of electric shock, plug each power supply cord into
separate branch circuits employing separate service grounds.
Note:
To ensure full dual redundancy, the two power supplies must be
powered from independent power sources in the cabinet power rails.
Power Switch
