v2.0
LDK 8000 User’s Guide | Installation
2-5
2.4.2
Positioning the viewfinder
The horizontal position of the viewfinder can be adjusted as follows to suit your requirements:
1.
Loosen the locking ring (1). (As seen from the rear of the camera, turning the locking ring
counterclockwise moves it towards the handle.)
2.
Slide the viewfinder horizontally along the rail to the desired position.
3.
Tighten the locking ring (1) by turning clockwise.
The dioptre hood and eyepiece of the viewfinder can be rotated vertically.
The viewfinder can be positioned backwards and forwards along the camera axis. Loosen the
support bracket round bar retaining lever (2) and slide the round bar (3) forwards or backwards.
When the desired position is reached tighten the support bracket round bar retaining lever (2)
again.
To use the viewfinder at a distance press the button (4) below or above the eyepiece tube and
swing it free of the associated clip (5). The display can now be seen from further away.
Figure 2-4.
Viewfinder positioning
5
4
2
1
3
Summary of Contents for LDK 8000
