GRASS VALLEY KARRERA K-FRAME, Installation & Service Manual, Page: 182 / 278

182 KARRERA K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
Operators should also test any EMEMs, RMEMs, or other items created or
saved previously to be sure they work properly with their currently
acquired resources.
Engineering Login
A Karrera K-Frame system can be configured as two suites, with each suite
having up to two control surfaces. The Eng Login menu is used to choose
which suite and control surface the GV Switcher menu will interact with
and control.
To access a different Suite or Control Surface (CS), go to the
Eng Setup
,
Eng Login
menu and touch the
Change Identity
button ( Figure 132 ). The
Suite
and
CS
buttons will then be available for selection. After selecting a dif-
ferent button, a warning message appears. Select
Yes
to make the change,
or
No
to cancel the change and retain the existing menu identity.
Note Changing a menu’s identity in this way is temporary. Reloading the menu
application or rebooting the Menu Panel will restore the Suite and Control
Surface identity defined in the Node Settings, Control Surfaces menu.
Figure 132. Eng Login Menu