KAM-SD-4DAC-DMX Instruction Manual
29
KAM-SD-4DAC-DMX Links and Web Pages
Input/Output Configuration Web Page
Use the I/O Config web page to:
•
View a graphical overview of the currently installed rear module con-
nectors,
•
See signal status of inputs,
•
Assign easily recognized signal names that will help later in the config-
uration process.
illustrates the I/O Config web page for the KAM-MIX-R passive
rear module required for the KAM-SD-4DAC-DMX front module.
Figure 13. KAM-MIX-R Rear Module Configuration Web Page
I/O Config Web Page Elements
Header Row
The top header row provides the connector hardware physical label (J#)
and the dedicated signal type for the connector. This information is deter-
mined by the type of rear module and front processor module installed
(refer to the
Functional View Web Page on page 31
Connectors
The connector row illustrates connector type provided (BNC or 3-pin ter-
minal) for each port. For this rear module, one serial digital video input,
four analog audio inputs, and one serial digital output are provided.
Input/Output Mode
I/O mode is either static read-only or an operational Input/Output selec-
tion (determined by the rear module used).
Use
this
link
