KAM-SD-2AES-MUX Instruction Manual
27
KAM-SD-2AES-MUX Links and Web Pages
Warning/Fault Summary
The warnings and faults shown below are reported in the summary section
of the Status web page (
Fault
indicates a serious
condition that prohibits proper operation. A
Warning
indicates a condition
which may or may not adversely affect operating conditions, but should be
noted. Warnings may possibly be corrected by changing configuration, set-
tings or input signals.
Warnings
•
WARNING - Rear Module is not connected
•
WARNING - Wrong Rear Module (incompatible with Kameleon)
•
WARNING - Wrong Rear Module (no communication)
•
WARNING - Wrong Rear Module (unknown type, incompatible)
•
WARNING - Video Input is 625 and reference is 525 lines
•
WARNING - Video Input is 525 and reference is 625 lines
•
WARNING - Video Input is 625 but configuration is 525 lines
•
WARNING - Video Input is 525 but configuration is 625 lines
•
WARNING - Video Input Signal not detected
•
WARNING - Frame Reference is not present
•
WARNING - Frame Reference is not locked to input
•
WARNING - Frame Reference is not present
•
WARNING - No Video output - GenLock selected but not present
•
WARNING - 1 or more Audio Input signals not detected
•
WARNING - 1 or more Audio Input signals have had AES stream errors
•
Internal Error - Unknown submodule type
Faults
•
FAULT - nnV power supply bad. (nn = variable: 24 V, 12.5 V, 5 V,
3.3 V, 1.5 V, -5 V, or -12.5 V)
•
FAULT - A/D failed (A /D system measuring power supplies and bus
levels)
•
FAULT - Xilinx 1 failure (main video processor)
•
FAULT - Xilinx 2 failure (main audio processor)
•
FAULT - MFM (Multi-function module) EEPROM checksum fails
•
FAULT - DS1803 not responding (digital potentiometer for video in
adjustment)
•
Internal Error - Unknown front module type
