manualshive.com logo in svg

GRASS VALLEY KAM-ENC-2AES, Instruction Manual

Share
Download
GRASS VALLEY KAM-ENC-2AES Instruction Manual Download Page 50

50

KAM-ENC-2AES Instruction Manual

KAM-ENC-2AES Links and Web Pages

 

Audio Channel Pairing Web Page

The Audio Channel Pairing web page (

Figure 30

) allows the input audio 

streams to be arbitrarily recombined into new pairs and swapped or set to 

Silence

. The rows represent the audio input streams and the columns repre-

sent the audio output channels. The columns are grouped together into two 
different digital audio pairs (Pair 1 Ch A and Ch B and Pair 2 Ch A and 
Ch B).

The audio streams in the group are paired on the Audio Channel pairing 
web page. The pairs (Pair 1 Ch A and Ch B and Pair 2 Ch A and Ch B) can 
be output on the balanced or unbalanced AES audio output connectors on 
the KAM-AES-R rear module (see 

Input/Output Configuration Web Page

 on 

page 28

)

. 

Note

Audio output names are assigned using the I/O Config web page.

Figure 30.  Audio Channel Pairing Web Page

Use
this
link

Summary of Contents for KAM-ENC-2AES













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands