13
Kaleido-X16
Hardware Description & Installation Manual
Mosaic Outputs
HDMI Outputs
There is one HDMI output for each output head (MV OUT 1, MV OUT 2). See
HDMI Outputs
on page 25 for specification details. The HDMI connection is a high definition connection
for the multiviewer output, which carries audio and video, and can support resolutions up
to 1920 × 1200.
HD-SDI Monitoring Outputs
There are two HD-SDI monitoring outputs: one for each head (see
HD-SDI Monitoring
Outputs
, on page 26 for specification details).
External Reference
The external reference (REF) input signal allows the Kaleido-X16 to genlock to the local
plant.
Note:
To use an HDMI output connection as a DVI output, use an HDMI
cable with an HDMI-to-DVI adapter at one end. Alternatively, use an HDMI-
to-DVI cable.
IMPORTANT
Audio monitoring at the HD-SDI outputs is supported on recent
hardware only.
Support for audio monitoring at the HD-SDI outputs requires
version 5.30
(or later) of the Kaleido-X Software, and recent hardware. In the XAdmin
Status and Options page, under SYSTEM, the value indicated for the
Card
revision
attribute must be
0x4
or more.
MV OUT 1/DVI OUT 1
MV OUT 2/DVI OUT 2
BNC connector for
Mosaic SDI OUT 2
BNC connector for
Mosaic SDI OUT 1
BNC connector for
External Reference
