37
Kaleido-MX (3RU)
Quick Start Guide
Verifying an Input Card’s Application Version
To verify the application version on an input card
1 Press the Select button on the front edge of the Kaleido-MX
input
card.
The Status LED on the selected card flashes orange, and the associated control menu
appears on the display of the Densité frame’s local control panel.
2 On the local control panel, press the [–] button.
The version of the Kaleido-X Software that is running on the card (e.g. “7.33-
build.5516”) appears on the display.
3 Press the Select button
on the front edge of the input card
to exit the control menu.
RS-422 Connection Diagram
Each output card supports one RS-422 serial port over an RJ-45 connector. This port allows
the Kaleido-MX to connect to external serial devices such as a router, production switcher,
or router controller.
The pinout for the RS-422 signals on the RJ-45 connectors, and the wiring diagrams for the
appropriate adapters, are shown here:
Select button
Status LED
Note:
The RS-422 ports each have an RJ-45 connector in order to preserve
space on a busy panel. The RS-422 interface specifies a DE-9 connector, so if
you are using this interface, you will require a DE-9-to-RJ-45 adapter. Grass
Valley supplies two adapter models, correctly wired for this application: a
straight adapter (part no. 1737-3000-102), and a crossover adapter (part no.
1792-3700-100).
USO
RESTRITO
