GRASS VALLEY K2 SAN, Installation And Service Manual

Page: 249 / 346

Description of K2 SAN Devices
Device terminology
K2 Media Client
The K2 product originally released with version 3.x K2 software. It can have internal storage,
direct-connect storage, or shared (SAN) storage.
First generation K2 Summit system
The K2 Summit Production Client product originally release with version 7.x K2 software. It can
have internal storage, direct-connect storage, or shared (SAN) storage.
K2 Summit 3G system
The K2 Summit 3G Production Client product originally release with version 8.1 K2 software. It
can have internal storage, direct-connect storage, or shared (SAN) storage.
K2 client
Either a K2 Media Client or a K2 Summit Production Client. This term is used for K2 clients with
internal storage, direct-connect storage, or shared (SAN) storage.
K2 SAN client
A device that is an iSCSI or Fibre Channel client to the K2 SAN.
Control point PC description
A control point PC runs applications from which you operate, configure, and monitor the K2 SAN.
You can have one or more PCs that provide control point functionality. You must have at least one
control point PC on which you install and run the K2Config application.
The primary applications that run on a control point PC are as follows:
• The K2 System Configuration application
• SiteConfig
• Storage Utility
• AppCenter
• SNMP manager
In addition, you can use the control point PC for the following applications:
• QuickTime
• Adobe Acrobat Reader
• Windows Remote Desktop Connection
2014 01 27 K2 SAN Installation and Service Manual 249