GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 80 / 216

80 JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 5 — Connecting the L-S, LCD Panel
Changing the Connection Type Using the Panel’s Menu
The panel’s connection type can be changed using the panel’s menu. The
steps needed to change the connection for each panel are explained below.
Note You can use a password to lock out menus. See the Disabling the Configura-
tion and Setup Menus on the Control Panel section on page 63 .
L64
Figure 39. L64 Control Panel
Follow these steps to change the Connection Type setting using the L64
panel’s menu:
1. Press the Menu button. The items will change; look at the Preset/Level
display window (the bottom display window).
2. Press the UP or the Down Arrows to scroll to the
Panel Setup?
option
( Figure 40 ).
The
Take
button in the lower right-hand corner will turn green
( Figure 40 ).
Figure 40. L64 Control Panel Menu
Preset Menu Level
Undo
Take
Protect/
Lock
Clear
Preset/Level Display
Window
UP or Down Buttons
Menu Button
Take Button