GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 159 / 216

JUPITER L-S and LCD Series Control Panel Instruction Manual 159
Network Wiring
Network Wiring
The LCD series panels are connected to the CM-4000 System Controller by
either an Ethernet or Serial connection. Maximum length of a LAN (Cat5
cable) connection is 329 feet (100 meters). The Serial connection cannot be
greater than 2000 feet. The LAN must be capable of performing 100 Mb
operations, and each Ethernet segment (hub to panel) has a 100 meter limit.
See
Figure 85 .
Figure 85. LAN only system connections.
Buttons
Button Configuration Overview
Source Button Configuration
Source button functions are assigned on a panel by creating a Jupiter CP
Input set of type CPESXTND. The set table in this Input set consists of a list
of button numbers and the name of the router input associated with each
button. The CP Input set is assigned to the panel using the MPK Devices
table.
For more information about button configuration, see CP Input and CP
Output Sets on page 62 .
LAN 1 (Cat 5 Ethernet) cable.
Max. recommended length per
segment = 100 meters (329 ft)
CM-4000
System
Controller
(AccuSwitch)
100baseT Jupiter LAN
to Jupiter
File Server
64 LAN-operated
LCD panels per CM
maximum
IP switch