GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 130 / 216

130 JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 6 — L-S Series Panel Operation
Basic Operation
With all available levels toggled ON (high amber), press a Source button
(light green). Selecting the Source completes the switch to the Destination.
Breakaway Switching
Select only the level button(s) on the right that you wish to switch before
selecting a Source.
Note If a level button cannot be toggled ON, the level may not exist on that Desti-
nation (For example, audio on a video monitor).
2/3/4 Destinations / 4 Levels
With two, three, or four Destinations defined, the top row of the eight-
button cluster is used for breakaway switching of the first four levels, and
the bottom row of four buttons is used to select from up to four Destina-
tions. An example is shown in
Figure 74 .
Figure 74. S25 Configured for 4 Levels / 4 Destinations
Operation
1. Select the Destination button on the lower right you wish to control.
2.
For a breakaway, select the level button(s) on the upper right for the
levels you wish to switch.
Note If the level button cannot be toggled ON, the level may not exist on that Des-
tination (For example, audio on a video monitor).
3.
Press a Source button (light green). Selecting the Source completes the
switch to the Destination.
5/6/7/8 Destinations
With five, six, seven, or eight Destinations defined, the eight-button cluster
on the right is used to select the Destination. Breakaway switching is not
available with this configuration. An example is shown in
Figure 75 .
4 Levels Sources
4 Destinations