GRASS VALLEY IQUCP25, User Manual

Page: 158 / 338

158
Essence Processing SDC
Logging - Card Diagnostics
Logging - Card Diagnostics
The Logging Card Diagnostics page is used to view log fields of the UCP - 3901 / IQUCP Card
and select those log fields to be enabled. Information on several parameters can be made
available to a logging device connected to the RollCall network. For the UCP-3901, logging
must be configured and enabled; see Logging - Configuration (UCP - 3901 Only) on
page 137.
Figure 6 - 37:
Logging - Card Diagnostics Page
The logging page comprises three columns:
Enable check boxes to activate log fields as required.
Logging Page
Column Description
Log Enable Select the check boxes that correspond to the parameters for which
log information should be collected.
Log Field Displays the name of the logging field.
Log Value Displays the current log value.
Parameter Description
NVRAM_FS= Logs whether the installed file system is QNX6 PowerSafe
or FAT32.
TOTAL_AVAILABLE_MEMORY
=
Logs total amount of CPU memory available to the card, in
bytes.
TOTAL_USED_MEMORY= Logs amount of CPU memory used by the card, in bytes.
NUM_CORE_DUMPS= Logs number of times a core dump has been performed
as a result of an application crash.
LAST_CORE_DUMP_NAME= Logs name of last application to crash.
LAST_CORE_DUMP_TIME= Logs time of last core dump performed as a result of an
application crash.