GRASS VALLEY Ignite HDC Series, Instruction Manual, Page: 79 / 122

Ignite SDC/HDC Robotic Camera Instruction Manual 79
Appendix
C
HD Camera Block
Controls and Indicators
HD camera controls and indicators are shown in Figure 50 and described
in Table 33 .
Figure 50. HD Camera Controls and Indicators
Table 33. HD Camera Controls and Indicators
Item Name Description
1 Lens mount 2/3” Standard bayonet type (B4) mount.
2 Lens fixing ring knob
Rotate the lens fixing ring knob counterclockwise and remove the lens mount
cap. Mount the lens on the camera and rotate the lens fixing ring knob clockwise
in order to fix the lens securely.
3 Interface connector (I/F) Input terminal dedicated to control signals from an optional remote control box.
4
Tally output connector
(TALLY OUT)
R tally and G tally outputs. These signals take effect when the optional card for
studio applications has been inserted.
5 Iris connector (IRIS) Input terminal for lens with an iris control function.
6
Zoom/Focus connector
(ZOOM/FOCUS) Used to connect the zoom/focus control cables of lens.
7
DC 12 V input connector
(DC12V IN) 12 V DC input.
8 Operate indicator
Green LED illuminates to indicate DC power is supplied to the camera.
When the video format is changed, the operate LED flashes twice when the for-
mat is 720/60p and once with any other format.
1
6
5
4
3
2
10
9
8 7
11
12
13
14
FRONT REAR
8492_42_r0