manualshive.com logo in svg

GRASS VALLEY FGAEY 1312, User Manual, Page: 37 / 71

Share
Download
GRASS VALLEY FGAEY 1312 User Manual Download Page 37

MV-801 User Manual

Issue 1 Revision 1 

Page 17 

2.2.2  Rear Panel LEDs

Multiviewer head display outputs and Ethernet ports have LED status indicators, see Figure 7.

2.2.2.1 Multiviewer Head Display Outputs 

One status LED per output. Table 6 describes the LED function.

Figure 7  MV-801 Rear Panel LEDs:   a) Multiviewer Head Display Outputs;   b) Ethernet Ports

Ethernet Link Status LEDs (Table 7)

Multiviewer Head Display Outputs Status LEDs (Table 6)

a)

b)

Table 6 

Multiviewer Head Display Output Status LED  

Color

LED

Status

Blue

Licensed Output; SFP Fitted. 1080p video output signal.

Blue / White Flashing

.....

Flashes Blue/White at 1Hz. 

Licensed Output; SFP fitted. 1080p with embedded audio. 

Green

Licensed Output; SFP Fitted. 720p video output signal.

Green / White Flashing

.....

Flashes Green/White at 1Hz. 

Licensed Output; SFP fitted. 720p with embedded audio. 

Red

Licensed Output; No SFP Fitted.

Off

OFF

Unlicensed output.

Red / Green Flashing

.....

Flashes Red/Green at 1Hz 

during

 an internal FPGA upgrade 

(part of a unit software upgrade).

Red Flashing

.....

Flashes Red/Off at 1Hz 

after

 a unit software upgrade if:

•

internal FPGA upgrading was unsuccessful; or 

•

internal FPGAs fail to load during unit boot.

Note:

 A unit upgrade to the same version may be carried out 

to recover a unit if FPGA upgrading was unsuccessful. 
Otherwise, contact Grass Valley support.

Summary of Contents for FGAEY 1312








































































Reviews:

No comments